500mm diamond saw blade for marble, 20" inch marble diamond saw blade

Diamond Blade Diameter: 500 mm or 20inch
Segment Size: 40x4.0/4.2x10 mm
Segment Type: segmented
Segment Quantity: 36 pcs per blade
Cutting Materials: Marble
Weld: High frequency, Silver Brazed Blade
Custom Made: YES
Packing: hard paper case and wooden box


ChinShine 20" diamond saw blade for cutting marble and other sizes of marble blades are the most important diamond blades in our company, our 500mm diamond saw blade produced in most sophisticated high frequency technology, can cut various hardness marble slabs, helps you save over 50% in cost. Our special alloyed steel core and optimized segment design achieves chip free, high speed, sharp and long lifespan.

We accept custom made order according to your needs, the segment height could be in size 8mm, 10mm, 12m.



Tips for 20" marble diamond saw blade when cutting


* Wear proper safety gear.
* Read the manual and make sure to follow the manufacturer’s recommendation on specification of material to be cut and suitability   for dry or wet cutting applications
.
* Before starting the cutting job, double check the 500mm diamond saw blades to see if there are any damages incurred during   shipping or due to previous use.
* During start-up or operation, do not stand in direct line with dry diamond or abrasive blades.
* During operation, maintain a firm grip on hand-held saws.

* Ensure that the machine is not dropped on the cutting disc.
* Be careful to avoid burns from the overheated segments or hot engine parts.

* Keep water supply continuously.

500mm diamond saw blade for marble

Related Articles:

a. Diamond saw blade cutting trouble shooting, diamond blade problem happens?  
b.
Manufacturing method of diamond saw blade.
c. Why choose ChinShine as your China diamond blades supplier? Why buy diamond saw blades from us?
d. Factors That Determine the Service Life of Diamond Blades
e. Marble cutting with single point cutting tool and diamond segments on frame saw.
f. Choice of Saw Blades Based on Applications.

上一篇:300mm diamond saw blade for marble, 12" marble diamond blade 下一篇:Diamond Marble Cutting Blade Supplier

Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.
Required fields are marked *


Name *:
Email *:
Phone :
Message *:
ip:
riqi:
yemian:
yemian: Click image to refreshClick the picture to refresh
 
Full bullnose diamond stone edge hand profile wheel with female thread
Full bullnose diamond sto
Hexagon 3 step diamond dry resin polishing pads for natural stone
Hexagon 3 step diamond dr
Top quality brazed 7 inch turbo diamond concrete floor grinding cup wheel
Top quality brazed 7 inch
China 7" S shape turbo diamond grinding cup wheel for floor concrete
China 7" S shape tur

conatct us

Tel: +86-595-2288-5227(Ext:2)
Fax: +86-59560-51397
Mob: +86-133-2887-5227 -English
Email: sales@diamond-blade.org
Technique: webmaster@diamond-blade.org

Copyright © 2006-2018.China(Quanzhou) Diamond Saw Blade Association All Rights Reserved. Email:webmaster@diamond-blade.org