Magnets for Core Bit Segments Welding Magnet Holders Retipping Diamond Segment

Diamond Segment Magnet Holders

Related Name:Diamond core drill bit magnet holder, magnet holder brazing segment, diamond segment magnet holder for core drill bit, core bit retipping magnet.

Seçilebilecek dört farklı standart yan açıklık:

1. position side clearance: 0.50mm
2. position side clearance: 0.75mm
3. position side clearance: 1.00mm
4. position side clearance: 1.25mm

When rewelding the segments, the usual rule is

İç boşluk = (uç kalınlığı - çekirdek kalınlığı) x 0,4
Dış boşluk = (uç kalınlığı - çekirdek kalınlığı) x 0,6

Matkap ucu manyetik tutucu kullanarak matkap ucunu yeniden yüzeylendirmek için ipuçları:

• Please choose a reasonable side clearance according to the thickness of the diamond bit and the steel core bit.
• Make sure that the magnetic holder is clean and free from other objects.
• Make sure that the magnetic holder is well fixed when welding.
• The welding temperature should be lower than 1000℃.
• Do not touch the magnetic holder directly with your body after welding, but use tweezers or pliers to avoid burns.
• Before cooling with water, please cool the magnet on a stone or metal surface for one minute to prolong its service life.

How to care for the drill magnet holder after reconditioning

• Dry the magnet after use, preferably air dry.
• Store the magnet holder in a dry and ventilated place.
• Replace the magnet holder promptly if it is damaged or if there is a serious loss of magnetism.

Welcome to buy Drill Bit Magnet Holder and Diamond Drill Bit Segment from ChinShine, a professional manufacturer in China - your best choice!