The Standard of Polishing Concrete Floor
There is not published standard for polishing concrete floor, generally speaking, the concrete surface must be polished through a series of polishing pads from grit #200 to 3500. At this level the concrete surface will show the glossy sheen and high reflectivity without using a topical coating. The buffing pads don't need to be used for the concrete floor.

polishing pads for concrete

Used as the surface sealer of concreted structure with excellent adhesion. The polishing concrete is not only remove coarse surface, but also makes flat and shine surface by applying a sealer.

An internal impregnating sealer is applied during polishing concrete. The sealer sinks into the concrete , it is invisible to the eyes. This can protect the concrete from inside by outside, this can also harden and densifie the concrete.

When professional workers polishing the concrete floor by using all the series polishing pads, they never apply for a topical coating or wax. According to our experienced engineers, "Waxing the surface would be defeating the purpose of a fully polished floor, because the concrete floor itself is already shining, so there is no need to put something on the floor that would then need to be maintained."

Related Articles:
a. How to Polish and Grind Marble, concrete and floor by DIY?
b. Buy Concrete Diamond Blades for Building Contractors.
c. Grinding and Abrasive Tools improvement.

Previous:What is Electroplated, Brazed and Sintered Diamond Tools? Next:The care tips for marble or natural stone

Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.
Required fields are marked *


Name *:
Email *:
Phone :
Message *:
ip:
riqi:
yemian:
yemian: Click image to refreshClick the picture to refresh
 
7" double row diamond grinding cup wheel for concrete and stone
7" double row diamon
Buy magnet holder for welding segment on diamond core drill bit for sale
Buy magnet holder for wel
Reinforced frankfurt silicon carbide polishing abrasive brush for marble for sale
Reinforced frankfurt sili
New Design 250mm 10inch Diamond Grinding Plates for Concrete
New Design 250mm 10inch D

conatct us

Tel: +86-595-2288-5227(Ext:2)
Fax: +86-59560-51397
Mob: +86-133-2887-5227 -English
Email: sales@diamond-blade.org
Technique: webmaster@diamond-blade.org

Copyright © 2006-2018.China(Quanzhou) Diamond Saw Blade Association All Rights Reserved. Email:webmaster@diamond-blade.org